Pictures

 Click for full size

Here you can see the front of the box for the Shuttle ST. The key information (SATA, 2.5") is given clearly, and the product is clearly visible.

Here you can see the back of the box. All features, specifications, and contents are included. This is also where the limited yet effective directions are given, basically the only thing required is:

1- Remove the rear cover/control board.

2- Connect the harddrive SATA and power.

3- Re-insert the harddrive and control board

This is all the stuff that is included. As you can see everything arrived in great condition, no damage.. and most importantly, everything was actually in the box. The sleeve that was included feels slightly thinner than I would prefer, but it still gives a nice professional look to your portable harddrive.

This is the actual SATA control board. It is a very standard board, there is 1 SATA port, and 1 SATA power port. Connecting your harddrive is very simple, just slide it into place. This board is then secured onto the enclosure with 2 screws. Other than that, there really is no setup or preparation. As soon as your harddrive is connected it  is ready to use.

This is the back of the panel. You can see that it is FCC tested (yay) and it uses a standard USB port. There is also an optional power connection, which is only needed for high powered harddrives. The power connection is available directly from Vizo HERE if yu think you will need it.

Here you can see the enclosure fully connected and in use. This drive is fully plug 'n play, so all you have to do is connect it and everything is automatic from there. On the top left of the control board there is also an activity light. It is difficult to see in this picture due to lighting, but it shows all drive activity.